ITA | ENG

I NOSTRI INTERCURE®

Con la ricerca, il costante aggiornamento tecnologico e l’accurata selezione delle materie prime, il Gruppo Interbusiness è da sempre impegnato a soddisfare i requisiti dei propri Clienti.

Dal 1991, IB Chem S.r.l. (Interbusiness Chemicals), unità operativa di INTERBUSINESS S.r.l., si dedica alla produzione della gamma INTERCURE® impiegando le più moderne tecnologie per garantire la massima purezza dei prodotti, il rispetto dell’ambiente, della salute e della sicurezza. Questa unità operativa comprende un laboratorio QC e un laboratorio R&D entrambi dotati di moderne e sofisticate apparecchiature affidate a professionisti altamente specializzati. Un team multidisciplinare è quotidianamente impegnato a garantire la Soddisfazione del Cliente mantenendo costanti gli elevati standard qualitativi dei prodotti e ricercando soluzioni per soddisfare le esigenze dei singoli Clienti e del mercato.

TIPOLOGIE E APPLICAZIONI

I nostri INTERCURE® sono prodotti in un impianto a regola d'arte dove vengono impiegate solo materie prime purissime. Il nostro laboratorio QC è dotato di sofisticate apparecchiature analitiche che consentono ai nostri tecnici di mantenere costantemente monitorata la qualità del prodotto durante tutte le fasi del processo.

nome commerciale del prodotto

nome chimico

numero cas

scheda prodotto

Hexamethylenediamine Carbamate (HMDC)

143-06-6

INTERCURE® 1 is a blocked diamine cross-linking agent used in Fluoroelastomers (FKM), Polyacrilic (ACM), Ethylene-Acrylic (AEM) and Epichlorohydrin (ECO) elastomers. Depending on choice of elastomer, desired cure rate and physical properties can be obtained using levels ranging from 0.5 to 1.5 p.h.r..
INTERCURE® 1 is needed when applications require F.D.A. approval.
INTERCURE® 1 can also be used with additional accelerators to provide an optimum balance of properties in the above elastomers.

HMDC - dust free (2% Paraffinic White oil)

143-06-6
8042-47-5

INTERCURE® 1-DF, is a blocked diamine cross-linking agent containing 2% of paraffinc white oil. It is used in Fluoroelastomers (FKM), Polyacrilic (ACM), Ethylene-Acrylic (AEM) and Epichlorohydrin (ECO) elastomers.
Depending on choice of elastomer, desired cure rate and physical properties can be obtained using levels ranging from 0.5 to 1.5 p.h.r.
INTERCURE® 1-DF is needed when applications require F.D.A. approval.
INTERCURE® 1-DF can also be used with additional accelerators to provide an optimum balance of properties in the above elastomers.

HMDC - dust free (10% ester plasticizer)

143-06-6
14338-82-0

INTERCURE® 1-DF10 is a blocked diamine cross-linking agent containing 10% of synthetic ester plasticizer. It is used in Ethylene-Acrylic (AEM), Polyacrilic (ACM) and Epichlorohydrin (ECO) elastomers. Depending on choice of elastomer, desired cure rate and physical properties can be obtained using levels ranging from 0.8 to 2 p.h.r. INTERCURE® 1-DF10 can also be used with additional accelerators to provide an optimum balance of properties in the above elastomers.

Tetraphenylphosphonium bromide (TPPB)

2751-90-8

INTERCURE® 2, is a phosphonium salt used as accelerator for Fluoroelastomers (FKM); adhesion promoter of Fluoroelastomers (FKM) to a variety of other elastomers; curative for Polyacrylate polymers (ACM) for which it increases the compound shelf life, improves compression set, and reduces the mold fouling.

TPPB - dust free (4% Paraffinic White oil)

2751-90-8
8042-47-5

INTERCURE® 2-DF4, is a phosphonium salt containing 4% of paraffinic white oil. It is used as accelerator for Fluoroelastomers (FKM); adhesion promoter of Fluoroelastomers (FKM) to a variety of other elastomers; curative for Polyacrylate polymers (ACM) for which it increases the compound shelf life, improves compression set, and reduces the mold fouling.

N,N’-dicinnamylidene-1,6 hexanediamine

140-73-8

INTERCURE® 3, is a blocked diamine cross-linking agent used for a very safe processing of Fluoroelastomers (FKM), Polyacrilic (ACM), Ethylene-Acrylic (AEM) and Epichlorohydrin (CO-ECO) elastomers.
Depending on choice of elastomer, desired cure rate and physical properties can be obtained using levels ranging from 2.5 to 3.5 p.h.r.. INTERCURE® 3 may be used in combination with INTERCURE® 1.

4,4’–methylene-bis (cyclohexylamine) carbamate

13253-82-2

INTERCURE® 4, is an alicyclic amine salt used as a curing agent mainly for Fluoroelastomers (FKM). For its safety in processing, it can be positioned between INTERCURE®1 and INTERCURE® 3. Its cross-linking efficiency provides FKM compounds with physical properties similar to those obtainable with INTERCURE® 1. As with INTERCURE® 1, INTERCURE® 4 is needed when applications require F.D.A. approval.
While levels from 1.8 to 2.2 p.h.r. of INTERCURE® 4 meet a wide range of needs, a 2 p.h.r. level provides an optimum balance of safe processing, cure rate and physical properties.

Octadecyltrimethylammonium bromide (OTAB)

1120-02-1

INTERCURE® 18, is a cationic surfactant used in several elastomers (ACM, FKM, etc.) as accelerator.

TIPOLOGIE E APPLICAZIONI

I nostri INTERCURE® sono prodotti in un impianto a regola d'arte dove vengono impiegate solo materie prime purissime. Il nostro laboratorio QC è dotato di sofisticate apparecchiature analitiche che consentono ai nostri tecnici di mantenere costantemente monitorata la qualità del prodotto durante tutte le fasi del processo.

INTERCURE®1

nome commerciale del prodotto

Hexamethylenediamine Carbamate (HMDC)

nome chimico

INTERCURE® 1 is a blocked diamine cross-linking agent used in Fluoroelastomers (FKM), Polyacrilic (ACM), Ethylene-Acrylic (AEM) and Epichlorohydrin (ECO) elastomers. Depending on choice of elastomer, desired cure rate and physical properties can be obtained using levels ranging from 0.5 to 1.5 p.h.r..
INTERCURE® 1 is needed when applications require F.D.A. approval.
INTERCURE® 1 can also be used with additional accelerators to provide an optimum balance of properties in the above elastomers.

numero cas

143-06-6

scheda prodotto

INTERCURE®1-DF

nome commerciale del prodotto

HMDC - dust free (2% Paraffinic White oil)

nome chimico

INTERCURE® 1-DF, is a blocked diamine cross-linking agent containing 2% of paraffinc white oil. It is used in Fluoroelastomers (FKM), Polyacrilic (ACM), Ethylene-Acrylic (AEM) and Epichlorohydrin (ECO) elastomers.
Depending on choice of elastomer, desired cure rate and physical properties can be obtained using levels ranging from 0.5 to 1.5 p.h.r.
INTERCURE® 1-DF is needed when applications require F.D.A. approval.
INTERCURE® 1-DF can also be used with additional accelerators to provide an optimum balance of properties in the above elastomers.

numero cas

143-06-6
8042-47-5

scheda prodotto

INTERCURE®1-DF10

nome commerciale del prodotto

HMDC - dust free (10% ester plasticizer)

nome chimico

INTERCURE® 1-DF10 is a blocked diamine cross-linking agent containing 10% of synthetic ester plasticizer. It is used in Ethylene-Acrylic (AEM), Polyacrilic (ACM) and Epichlorohydrin (ECO) elastomers. Depending on choice of elastomer, desired cure rate and physical properties can be obtained using levels ranging from 0.8 to 2 p.h.r. INTERCURE® 1-DF10 can also be used with additional accelerators to provide an optimum balance of properties in the above elastomers.

numero cas

143-06-6
14338-82-0

scheda prodotto

INTERCURE®2

nome commerciale del prodotto

Tetraphenylphosphonium bromide (TPPB)

nome chimico

INTERCURE® 2, is a phosphonium salt used as accelerator for Fluoroelastomers (FKM); adhesion promoter of Fluoroelastomers (FKM) to a variety of other elastomers; curative for Polyacrylate polymers (ACM) for which it increases the compound shelf life, improves compression set, and reduces the mold fouling.

numero cas

2751-90-8

scheda prodotto

INTERCURE®2-DF4

nome commerciale del prodotto

TPPB - dust free (4% Paraffinic White oil)

nome chimico

INTERCURE® 2-DF4, is a phosphonium salt containing 4% of paraffinic white oil. It is used as accelerator for Fluoroelastomers (FKM); adhesion promoter of Fluoroelastomers (FKM) to a variety of other elastomers; curative for Polyacrylate polymers (ACM) for which it increases the compound shelf life, improves compression set, and reduces the mold fouling.

numero cas

2751-90-8
8042-47-5

scheda prodotto

INTERCURE®3

nome commerciale del prodotto

N,N’-dicinnamylidene-1,6 hexanediamine

nome chimico

INTERCURE® 3, is a blocked diamine cross-linking agent used for a very safe processing of Fluoroelastomers (FKM), Polyacrilic (ACM), Ethylene-Acrylic (AEM) and Epichlorohydrin (CO-ECO) elastomers.
Depending on choice of elastomer, desired cure rate and physical properties can be obtained using levels ranging from 2.5 to 3.5 p.h.r.. INTERCURE® 3 may be used in combination with INTERCURE® 1.

numero cas

140-73-8

scheda prodotto

INTERCURE®4

nome commerciale del prodotto

4,4’–methylene-bis (cyclohexylamine) carbamate

nome chimico

INTERCURE® 4, is an alicyclic amine salt used as a curing agent mainly for Fluoroelastomers (FKM). For its safety in processing, it can be positioned between INTERCURE®1 and INTERCURE® 3. Its cross-linking efficiency provides FKM compounds with physical properties similar to those obtainable with INTERCURE® 1. As with INTERCURE® 1, INTERCURE® 4 is needed when applications require F.D.A. approval.
While levels from 1.8 to 2.2 p.h.r. of INTERCURE® 4 meet a wide range of needs, a 2 p.h.r. level provides an optimum balance of safe processing, cure rate and physical properties.

numero cas

13253-82-2

scheda prodotto

INTERCURE®18

nome commerciale del prodotto

Octadecyltrimethylammonium bromide (OTAB)

nome chimico

INTERCURE® 18, is a cationic surfactant used in several elastomers (ACM, FKM, etc.) as accelerator.

numero cas

1120-02-1

scheda prodotto

Via Spartaco, 25 - 20135 Milano (Italy)
T. +39 02 55190093
Fax. +39 02 59901213
info@interbusinessgroup.com

UFFICIO VENDITE
customer.service@interbusinessgroup.com

UFFICIO ACQUISTI
purchasing@interbusinessgroup.com

ISO 9001:2015 UNI EN ISO 9001:2008

INTERBUSINESS - P.IVA 07770880156
Copyright © 2017 Interbusiness Group . All Rights Reserved. | Privacy | Cookie Policy

Design by Tosi Comunicazione